Panel track blinds are leaves of whole body of the fabric collected on one side when opened and overlap a few centimeters when closed. This window style has become an update of narrow vertical blinds. The slopes are less fussy and fabric covering is more modern. The best suspension and appearance is achieved by aligning the panel interconnection to maintain the rigidity of the panel. This is an easy window treatment done. Homemade panel track blinds.
Measure the height from the floor panel to the clip on the track assembly. Measure the width of the window. Add 4 inches to the number of panel track blinds to be used. Cut the fabric to the panel height plus width of more than 1 inch for hems. Iron one adhesive side of the interface with the lining.
Cut two pieces of bone channel and a spare channel 1 weight curtains narrower than the width inch panel. Bone cut 1/2 inch smaller, round ends with scissors. Inserting the bone canal. Turn the bottom edge of the fabric decoration half inch to the inside and iron. Remove the bone from his last bone canal. Turn the top edge of the fabric decoration half inch to the inside and iron.